Professional solutions for high brightness outdoor LED modules
The audience's viewing angle and distance are determined by the dot pitch of Highmight's outdoor module series in various installation circumstances. The amount of video content that can be shown increases with clarity. Furthermore, the content's design is crucial. The audience may get a more engaging and participatory experience thanks to the naked eye parallax video "tailored" for the display.
Feature And Advantage
The industry average brightness is significantly lower than the standard brightness, which can reach 5000–6000cd/m². This is caused by a particular optical design in conjunction with round-head lamp beads and a high-brightness large-size chip. The screen information is still readily visible even when the midday sun shines directly on it, making it ideal for usage outside or in an area with intense direct sunlight.

When compared to a typical common anode drive, common cathode drive technology uses around 25% less energy. Its structural layout facilitates heat dissipation more effectively:
Die-cast aluminum, which has a thermal conductivity of up to 200W/m·K, makes up the bottom shell.
The honeycomb-shaped heat dissipation holes have a 30% larger area.
Dust collection is successfully avoided by the fanless design and passive heat dissipation.

Protection like the military's
Three degrees of protection are built into the module's design:
Front protection is a 3 mm thick mask that tilts downward to reduce reflection and prevent objects from striking it.
Protection in the middle: The PCB board is covered with three different kinds of anti-paints: one that prevents oxidation, one that keeps moisture out, and one that prevents salt spray corrosion. The 48-hour salt spray test was passed by the board.
Waterproofing the rear is ensured by an automated glue filling process and a silicone sealing ring.

Magnetic installation: 16 NdFeB magnets with a 2500GS magnetic force are integrated into each module. This facilitates speedy assembly and disassembly.
Design for front maintenance: 90% of maintenance time is saved because changing modules doesn't need disassembling the box.
Fall prevention system: Each module comes with a stainless steel safety rope that has a tensile strength more than 50 kg.
Modular interface: The HUB75 can be hot switched and has a single input and output signal interface.

Specifications
|
LED outdoor module MH-A series (PH2-PH5) |
|||||
|
Module model (mm) |
MH-A 2 |
MH-A 2.5 |
MH-A 3 |
MH-A 4 |
MH-A 5 |
|
Module point spacing (mm) |
2 |
2.5 |
3.076 |
4 |
5 |
|
Module Size (mm) |
320x160 |
320x160 |
320x160 |
320x160 |
320x160 |
|
Module pixel |
80x80 |
128x64 |
104x52 |
80x40 |
64x32 |
|
Density pixels (dot/㎡) |
250000 |
160000 |
105625 |
62500 |
40000 |
|
Lamp bead model |
SMD1211 |
SMD1415 |
SMD1415 |
SMD1921 |
SMD1921 |
|
Brightness (cd/㎡) |
4999 |
5000 |
5000 |
4000 |
5500 |
|
Refresh rate (Hz) |
1920/3840 |
1920/3840 |
1920/3840 |
1920/3840 |
1920/3840 |
|
Scanning mode |
1/20sweep |
1/16sweep |
1/13sweep |
1/10sweep |
1/8sweep |
|
Module weight (kg) |
0.15 |
0.28 |
0.28 |
0.28 |
0.28 |
|
Module thickness (mm) |
15.6 |
15.6 |
15.6 |
15.6 |
15.6 |
|
Lamp working life |
≥100,000 hours |
||||
|
Pixel composition |
RGB 3-in-1 |
||||
|
Grayscale |
14bit |
||||
|
Maximum power (W/㎡) |
1000-1200W |
||||
|
Conventional power (W/㎡) |
400-600W |
||||
|
Eliminate ghosting |
Equipment |
||||
|
Input voltage |
AC100~240V 50/60HZ |
||||
|
Module input voltage |
DC4.7~5V±0.2V |
||||
|
Environment |
Temperature -10~40℃ Humidity 10%-90% |
||||
|
LED outdoor module MH-A series (PH5-PH10) |
|||||
|
Module model (mm) |
MH-A 5 |
MH-A 6 |
MH-A 8 |
MH-A 10 |
MH-A 10 |
|
Module point spacing (mm) |
5 |
6.67 |
8 |
10 |
10 |
|
Module Size (mm) |
320x160 |
320x160 |
320x160 |
320x160 |
320x160 |
|
Module pixel |
64x32 |
48x48 |
40x20 |
32x16 |
32x16 |
|
Density pixels (dot/㎡) |
40000 |
22477 |
15625 |
10000 |
10000 |
|
Lamp bead model |
SMD2727 |
SMD3535 |
SMD3535 |
SMD3535 |
SMD3535 |
|
Brightness (cd/㎡) |
5500 |
6000 |
5500 |
4000 |
5800 |
|
Refresh rate (Hz) |
1920/3840 |
1920/3840 |
1920/3840 |
1920/3840 |
1920/3840 |
|
Scanning mode |
1/8sweep |
1/6sweep |
1/5sweep |
1/4sweep |
1/2sweep |
|
Module weight (kg) |
0.28 |
0.28 |
0.28 |
0.28 |
0.28 |
|
Module thickness (mm) |
15.6 |
15.6 |
15.6 |
15.6 |
15.6 |
|
Lamp working life |
≥100,000 hours |
||||
|
Pixel composition |
RGB 3-in-1 |
||||
|
Grayscale |
14bit |
||||
|
Maximum power (W/㎡) |
1000-1200W |
||||
|
Conventional power (W/㎡) |
400-600W |
||||
|
Eliminate ghosting |
Equipment |
||||
|
Input voltage |
AC100~240V 50/60HZ |
||||
|
Module input voltage |
DC4.7~5V±0.2V |
||||
|
Environment |
Temperature -10~40℃ Humidity 10%-90% |
||||
Application Areas

Information release system for highways
Our P5 changeable information board project for a highway:
Scale: More than 1,200 square meters in total, including 86 display screens
Anti-glare and long-distance identification (visible distance up to 300 meters) are special needs.
Customized black mask with excellent contrast and an automated brightness adjustment system are the solutions.
Data from operations: It has been operating nonstop for three years, with an average failure-free time of more than eight thousand hours.
Naked-eye 3D large screen for urban commercial complex
P4 outdoor LED project for a commercial center:
Technical challenge: arc splicing (radius 15 meters) + high refresh rate requirements
Innovative solution: flexible PCB soft module + patented arc splicing structure
Display effect: refresh rate 4200Hz, grayscale 14bit, perfect support for 8K video source
Customer feedback: average daily passenger flow increased by 18%, becoming a popular check-in point in the city.
Port terminal outdoor advertising screen
Ningbo Zhoushan Port P6 full-color LED display screen:
Environmental challenges: high salt fog, strong typhoon climate
Reinforced design: stainless steel fasteners + three-proof paint reinforcement treatment
Operation performance: experienced multiple typhoon tests (maximum wind force 14), the structure is intact
Economic benefits: customer advertising revenue recovers investment costs within 9 months
Highmight Service

An examination of consumer demand
Examine the customer's usage of the product and their unique needs in relation to their industry.
Give instances of the 3D display effect and its advantages that are visible to the unaided eye.
creation of a unique solution
Consider the location of the screen, the amount of light in the space, and the viewer's perspective when recommending the appropriate screen size and resolution.
Offer a variety of display screen options.
Create the best 3D parallax effect possible so that viewers may see realistic effects from every angle.
Help with technical issues and advice
A thorough introduction to the basics of naked-eye 3D technology.
Answer questions about making content, making sure it works with other things, and what tools you need.
Give a schedule and cost estimates for the project.

Making and testing products
Strictly make naked-eye 3D display panels based on customer needs and run full tests on them.
Send out product acceptance reports to make sure that performance meets what the client expects.
Setting up and fixing
Hire a skilled company to install it on site to make sure the screen is safe and stable.
Make sure the parallax angle and display effect are working right for the optimum viewing experience.
Give a range of content display options to show how to make 3D effects that you can see with the naked eye.
Training for operations
Training for customer teams on how to use equipment, submit material, and manage it.
Give consumers instruction or suggestions for tools to help them make 3D display content.

Help with technical issues and problems
Give technical support 24 hours a day, 7 days a week to promptly fix problems.
Help from a distance or send engineers to fix things on-site.
Upgrades to hardware and software
Regularly deploy updates for the screen control system or content management software.
Offer services to upgrade hardware.
Guarantee and maintenance
Defective parts are repaired or replaced at no cost within the two to three-year guarantee period.
Provide routine maintenance services, like screen cleaning, performance testing, and material improvement suggestions.
Assistance with data and comments
Examine information on screen usage.
Continue improving your goods and services by gathering customer feedback.
Certificate

FAQ
Q: How to clean LED outdoor modules?
A:
After power off, use a soft brush or air gun to remove dust from the surface.
Stubborn stains can be wiped with a neutral detergent (such as alcohol), and corrosive solvents are prohibited.
Q: What should I do if water gets into the module?
A:
Cut off the power immediately, remove the module and dry it.
Check whether the sealing rubber ring is aging, and replace or repair it if necessary.
Q: What is the lifespan of LED modules?
A:
Usually 50,000~100,000 hours (depending on the usage environment and heat dissipation design).
Lifespan ends when brightness decays to 50%.
Hot Tags: high contrast outdoor led screen, China high contrast outdoor led screen manufacturers, suppliers, factory, customizable rental led display, maintenance of rental outdoor led display, outdoor led display rental installation, rentable led panel, rentable stage display, rental outdoor led displays price









