Naked-eye 3D advertising screen without 3D glasses
Transform your advertising with our cutting-edge Naked Eye 3D Advertising Screen! No glasses needed – deliver stunning, lifelike 3D visuals that captivate audiences and boost engagement. Perfect for high-traffic areas, this futuristic display ensures unmatched visibility and brand impact. Elevate your outdoor ads today!
Feature And Advantage
Using PH1.2-PH2.5 small-pitch LEDs, the pixel density is as high as 640,000 dots/㎡-160,000 dots/㎡ (P1.2), supporting 4K/8K ultra-high-definition content, and perfectly showing the depth and three-dimensional details of naked-eye 3D. The international standard SMPTE recommends that naked-eye 3D requires a minimum display density of 60PPI (pixels/inch), and the P1.2 pitch can reach 83PPI at a viewing distance of 2 meters, far exceeding industry requirements.
HDR technology with 5000:1 static contrast ratio, dark details as low as 0.01nit, bright peak up to 5000nit, dynamic contrast ratio enhances the layering of 3D content. Actual measurement data shows that when the contrast ratio is greater than 3000:1, the human eye's recognition of 3D depth of field increases by 40%.
Wide viewing angle + no moiré
160° ultra-wide viewing angle (horizontal/vertical), matte coating technology, moiré incidence <0.1%, ensuring no distortion of 3D effect when viewed from the side. CIE 1931 color standard test shows that the technology has a color deviation of ΔE<3 (unnoticeable to the human eye) at a viewing angle of 120°.
The brightness can reach 6000cd/㎡ in outdoor environment, supports intelligent light adjustment, and keeps the 3D picture clear and visible under 100,000 lux direct sunlight. According to VESA DisplayHDR 1400 certification standard, outdoor screen needs to be ≥5000cd/㎡ to resist sunlight reflection.
Production Process
Demand analysis and product design
Industrial design
The ID team with more than 10 years of experience uses 3D modeling software (SolidWorks/Rhino) to complete the structural design to ensure IP65 protection level
Optical design: Optimize the LED arrangement spacing (P2.5-P10 optional) through TracePro optical simulation software to achieve 160° ultra-wide viewing angle
Thermodynamic analysis: Use ANSYS for heat dissipation simulation to ensure that the module temperature difference is ≤15℃ under -30℃~60℃ environment
Material selection
LED light source: Seoul Semiconductor 2835 series SMD lamp beads, brightness ≥6000cd/㎡, life 100,000 hours
Driver IC: Macroblock MBI5252 constant current driver, support 16bit grayscale processing
Cooling system: 6063 aviation-grade aluminum alloy radiator, surface anodized, thermal conductivity ≥200W/m·K
Modular production process
Precision PCB manufacturing
Using 6-layer FR-4 board, line width tolerance ±0.05mm, impedance control ±10%
Immersion gold process to process soldering pads, gold layer thickness ≥0.05μm
Fully automatic SMT mounting
Yamaha YS24 mounting machine realizes 0201 component mounting, CPK≥1.67
Nitrogen reflow soldering process, peak temperature 245±3℃, welding yield ≥99.98%
LED chip packaging
Using ASM automatic die bonding machine, positioning accuracy ±15μm
Eutectic welding process, void rate <5%
Module level testing
Photoelectric testing system: Konica Minolta CS-2000A detection color gamut coverage ≥110% NTSC
Brightness attenuation ≤3% after 72 hours of high temperature and humidity test (85℃/85%RH)
Whole screen assembly and calibration
Module integration
Laser positioning instrument is used to assist installation, and the joint gap is ≤0.1mm
Flatness detection: 0.05mm/m² plane tolerance
Optical calibration
Adopting PWM dimming technology, the brightness supports 5000-8000nit 16 levels adjustable
Point-by-point correction system achieves color consistency of ΔE<2
Reliability verification system
Accelerated aging test
72-hour full-load cycle test (100% brightness, 25℃±3℃)
Pixel failure rate <0.0001% (one millionth)
Environmental stress screening
Temperature shock test: -40℃~85℃ cycle 100 times
Salt spray test: 96 hours 5% NaCl solution spray
Performance certification
Refresh rate ≥3840Hz (twice the industry standard 1920Hz)
Grayscale: 16bit processing accuracy, no step jump phenomenon
Delivery supporting plan
Military-grade packaging
Shockproof design: EPE pearl cotton + honeycomb aluminum plate double-layer buffer
Maritime standard: Container vibration test complies with ISTA 3A
On-site implementation
Provide steel structure load-bearing calculation (wind load coefficient ≥ 0.6kN/㎡)
Supporting installation fixture: Torque wrench preset value 12N·m±5%
Specifications
|
LED outdoor small pitch FC-Z series |
|||||
|
Module model (mm) |
FC-Z 1.25 |
FC-Z 1.5 |
FC-Z 1.8 |
FC-Z 2.5 |
FC-Z 1.25 |
|
Module point spacing (mm) |
1.25 |
1.5 |
1.875 |
2.5 |
1.25 |
|
Module Size (mm) |
240x270 |
240x270 |
240x270 |
240x270 |
240x270 |
|
Maximum current |
192x216 |
160x180 |
128x144 |
96x108 |
192x216 |
|
Density pixels (dot/㎡) |
640000 |
444444 |
284444 |
160000 |
640000 |
|
Lamp bead model |
SMD1010 |
SMD1010 |
SMD1010 |
SMD1010 |
SMD1010 |
|
Brightness (cd/㎡) |
≤3500 |
≤4000 |
≤4000 |
≤4000 |
≤3500 |
|
Refresh rate (Hz) |
3840 |
3840 |
3840 |
3840 |
3840 |
|
Scanning mode |
1/36sweep |
1/30sweep |
1/24sweep |
1/18sweep |
1/36sweep |
|
Box size (mm) |
480x540x70 |
480x540x70 |
480x540x70 |
480x540x70 |
480x540x70 |
|
Cabinet resolution |
384x432 |
320×360 |
256×288 |
192×216 |
384x432 |
|
Lamp working life |
≥100,000 hours |
||||
|
Pixel composition |
RGB 3-in-1 |
||||
|
Grayscale |
14bit |
||||
|
Maximum power (W/㎡) |
1000-1200W |
||||
|
Conventional power (W/㎡) |
400-600W |
||||
|
Eliminate ghosting |
Equipment |
||||
|
Input voltage |
AC100～240V 50/60HZ |
||||
|
Module input voltage |
DC4.7～5V±0.2V |
||||
|
Work Environment |
Temperature -10～40℃ Humidity 10％-90％ |
||||
|
Box weight |
16kg |
||||
Application Areas
Advertising media | Exhibitions | Commercial displays | Government and corporate image | Cultural tourism and real estate | Entertainment culture
About Us
Highmight stands as a global leader in the LED display industry, renowned for its excellence in cutting-edge manufacturing, comprehensive sales solutions, precision engineering, and unparalleled customer support. Guided by an unwavering commitment to integrity, practicality, and relentless innovation, Highmight has solidified its position as a premier brand, setting the benchmark for quality and technological advancement worldwide.
At Himate Technology, we don't just create LED displays-we engineer brilliance. With a relentless focus on cutting-edge technology, world-class R&D expertise, and visionary management, we transform ordinary spaces into dynamic hubs of communication and engagement.
From bustling transportation hubs to high-stakes medical facilities, from immersive stadium experiences to mission-critical control centers, our LED solutions are the heartbeat of modern connectivity. Whether guiding urban traffic, amplifying brand messaging, or safeguarding public safety, Himate's displays deliver instant, impactful, and intelligent visual communication-anywhere, anytime.
Certificate
FAQ
Q: What is an LED display?
A: An LED display is a screen that uses light-emitting diodes as a display light source and is widely used in advertising, stages, stadiums and other scenes.
Q: What is the working principle of an LED display?
A: An LED display displays images and videos by controlling the brightness and color of LEDs. Each pixel is composed of multiple LEDs, which can be mixed to produce a variety of colors.
Q: How to choose the resolution of an LED display?
A: The resolution you choose depends on the viewing distance and the usage scenario. The closer the distance, the higher the resolution; vice versa. Common resolutions include P2, P3.91, P6, etc. The smaller the P value, the higher the resolution.
Q: How long is the service life of an LED display?
A: The service life of an LED display is generally between 80,000 and 100,000 hours, and the specific life depends on the usage environment and maintenance.
Q: How to maintain an LED display?
A: Clean the screen surface regularly, check the power supply and control system, ensure good heat dissipation, and prevent the humid environment from affecting the equipment.
Hot Tags: naked eye 3d advertising screen, China naked eye 3d advertising screen manufacturers, suppliers, factory, naked eye 3d, Naked Eye 3D Display, 3d imaging
